Kyosho 34252 1/8 EP 4WD Readyset Psycho Kruiser VE (w/KT-331P) - KYO-34252

The brutal power of this machine is meant for expert hands only!

The Kyosho Psycho Kruiser VE is not for the faint of heart. In fact, it should come with a disclaimer. Some call it the most extreme power in an R/C model ever experienced. The combination of 22.2v 6-cell LiPo battery and 1500Kv NEON 7 brushless motor deliver frightening acceleration and top speeds of more than 80km/h! Factory assembled with loads of features and an Inferno pedigree, this ReadySet beast is for experienced drivers only.

Features: 

• 3 differential, shaft drive, full time 4WD chassis 
• Fully factory assembled Readyset
• Pre-cut 4 color printed body
• Pre-installed 1500Kv 22.2V + Team Orion NEON 7 brushless motor (drip proof)
• 2.4GHz R/C system with Syncro KT-331P transmitter
• Includes waterproof ultra high torque KS-203 steering servo
• Hardened main chassis
• Machined aluminum dial adjustable big bore shocks
• Hardened steel straight cut bevel gears and reinforced differential ring gears
• 6-spoke black chrome wheels & block tires
• Stabilizers and universal joints are equipped on front and rear
• Mud guard installed on rear axle provides protection from dirt and mud
• Resin chassis stiffener as used on the Inferno NEO is installed on front and rear
• Full ball bearings 
• Large bumper provides protection for the front suspension holders and lower arm plate
• Compatible with many optional parts for the Inferno series

Specifications: 
Type: Electric Monster Truck 
Scale: 1/8 
Length: 550mm 
Width: 427mm 
Height: 230mm 
Wheelbase: 355mm 
Ground Clearance: 40mm 
Weight: aprox. 4650g 
Suspension: 4-wheel Independent 
Drivetrain: 4WD 
Tread (F/R): 289mm / 289mm 
Motor: 1500Kv Team Orion Neon 7 brushless motor 
Radio: Syncro KT-331P 2.4GHz 
Servos: Included 
Batteries: None - Requires batteries (Sold Separately) 
Gear Ratio: 12.375:1 
Body: Painted/Installed 
Ball Bearings: Full Ball Bearings 
Experience Level: Expert 
Recommended Environment: Outdoor

Includes: 

• Pre-assembled chassis with pre-set control linkages
• Factory assembled printed body
• 2.4GHZ R/C system Syncro KT-331P pre-installed
• L-shape hex wrenches : 1.5, 2.0 ,2.5, 3.0mm
• Cross wrench (large)
• 17mm wheel wrench 

Needed to Complete: 

• (2) 2-3 cell LiPo Batteries with T-Style/Deans type connector run in series configuration. Minimum 4300mAh recommended.
• Lipo compatible charger
• (4) AA alkaline batteries for transmitter