An Egg lofting rocket designed for a teacher's needs and budget!
Through the wall thick balsa fins for easier alignment and super strength.
Designed for C11 and D engines. Carrying a regular size raw egg as a payload comes very close to exceeding max lift capability of most C6 engines used in other eggloft kits. Use C11 engines and you get a safe stable flight and a recovery suited for small school size flying fields.
Clear payload is big enough to carry TWO eggs! (with a D12-3 engine).
Swept fins allow the rocket to stand by itself. The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with awkward stand-off needed.
All these features add up to less time building and more time for your students to perform experiments with their eggstronauts.
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, carpenter's glue, sanding block, hobby knife, masking tape, clear tape, primer (white), paint (green, white) and clear coat (optional). Tools, construction and finishing supplies not included.
WHAT YOU NEED TO LAUNCH (sold separately):Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller,Estes model rocket engines,starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
WARNING
"
SKU | EST-1718 |
Brand | Estes |
Help other RC Hobbyland users shop smarter by writing reviews for products you have purchased.
Write A ReviewEstes 1718 Green Eggs Beginner Model Rocket Kit (12 pk) Bulk Pack - EST-1718
Or 4 interest-free payments of $94.75 with Learn more.
An Egg lofting rocket designed for a teacher's needs and budget!
Through the wall thick balsa fins for easier alignment and super strength.
Designed for C11 and D engines. Carrying a regular size raw egg as a payload comes very close to exceeding max lift capability of most C6 engines used in other eggloft kits. Use C11 engines and you get a safe stable flight and a recovery suited for small school size flying fields.
Clear payload is big enough to carry TWO eggs! (with a D12-3 engine).
Swept fins allow the rocket to stand by itself. The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with awkward stand-off needed.
All these features add up to less time building and more time for your students to perform experiments with their eggstronauts.
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, carpenter's glue, sanding block, hobby knife, masking tape, clear tape, primer (white), paint (green, white) and clear coat (optional). Tools, construction and finishing supplies not included.
WHAT YOU NEED TO LAUNCH (sold separately):Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller,Estes model rocket engines,starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
WARNING
"
SKU | EST-1718 |
Brand | Estes |
Help other RC Hobbyland users shop smarter by writing reviews for products you have purchased.
Write A ReviewOut of Stock
In Stock
Stock Located at Warehouse may require an additional 1-3 business days processing time before being dispatched. We aim to ensure that you receive your orders as quickly as possible.
$0.00